Desktop Or Shelf Mounting; Rack Mounting - Planet NOVASwitch GSW-800S User Manual

2.2.1 Desktop or Shelf Mounting

To install a GSW-800S on a desktop or shelf, simply complete the
following steps:
Step1: Attach the rubber feet to the recessed areas on the bottom of
the switch.
Step2: Place the GSW-800S on a desktop or shelf near an AC power
source.
Step3: Keep enough ventilation space between the switch and the
surrounding objects
Note: When choosing a location, please keep in mind the
environmental restrictions discussed in Section 4, Specification.
Step4: Connect your GSW-800S to network devices
A. Connect one end of a standard network cable to the
10/100/100 RJ-45 ports on the front of the GSW-800S.
B. Connect the other end of the cable to the network devices
such as printer servers, workstations or routers...etc.
Note: Connection to the Switch requires UTP Category 5 network
cabling with RJ-45 tips. For more information, please see the Cabling
Specification in Section 4, Specification.
Step5: Supply power to the Switch.
A. Connect one end of the power cable to the GSW-800S
B. Connect the power plug of the power cable to a standard
wall outlet.
When the GSW-800S receives power, the Power LED should remain
solid Green.

2.2.2 Rack Mounting

To install the switch in a 19-inch standard rack, follow the instructions
described below.
Step1: Place your GSW-800S on a hard flat surface, with the front
panel positioned towards your front side.
Step2: Attach a rack-mount bracket to each side of the switch with
supplied screws attached to the package. Figure 2-4 shows
how to attach brackets to one side of the switch.
GSW-800S User's Manual
13