Table of Contents
Advertisement
3.2.3 System Configuration
The following screen (Figure 3-5) is displayed when the System
Configuration heading is selected from the Main menu. Use the
System configuration menu to view and change the values. To change
the password, aging time, logout time or auto refresh time, use the
"Arrow" keys to move the highlight to the selection and then press the
"Enter" key. Entering the value for the highlighted selection. And then
press "Enter" again for confirmation.
Caution:
Record your new password in a safe place. There is NO
method of recovery if you forget or lost your password.
Table 3-2 describes the objects that shown in the system configuration
menu screen.
Figure 3-5 System Configuration Menu Screen
GSW-800S User's Manual
21
Advertisement
Table of Contents
