Table of Contents
Advertisement
Unlike the unmanaged switch (Dumb switch), GSW-800S performs
series smart functions that make the switch operate more effectively.
This section will describe the common usage of the Switch Smart
Configuration.
3.1 Preparing for configuration
3.1.1 Connecting a PC or Terminal to the RS-232 Port
When you are ready to configure the smart functions of the switch,
make sure you had connected the supplied RS-232 serial cable to the
RS-232 port at the front panel of your GSW-800S switch and your PC.
3.1.2 Terminal Emulation Setup Program
In Windows 95/98/2000/XP,launch "HyperTerminal", create a new
connection, and adjust settings as below:
Emulation: VT-100 compatible
Baud per second: 38400
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
To gain a demo, please see the Figure 3-1.
GSW-800S User's Manual
3. CONFIGURATION
15
Advertisement
Table of Contents
