Planet FSD-804P User Manual page 10

NOTE:
Step3: Keep enough ventilation space between the switch and the surrounding objects
NOTE:
Step4: Connect your FSD-804P to network devices
A. Connect one end of a standard network cable to the 10/100 RJ-45 ports on the
front of the FSD-804P.
B. Connect the other end of the cable to the network devices such as printer serv-
ers, workstations or routers etc.
NOTE:
Step5: Supply power to the Switch.
A. Connect one end of the power cable to the FSD-804P
B. Connect the power plug of the power cable to a standard wall outlet.
When the FSD-804P receives power, the Power LED should remain solid Green.
2.3 Installing Powered Devices
The FSD-804P is able to support power to 4 IEEE802.3af compliant powered devices.
When the powered device is connected to the FSD-804P by an Ethernet cable at the first
4 ports, the FSD-804P automatically detect the device and check if it is compliant with
IEEE80.23af standard. Then run the power provision process to provide power.
6
Optional rack-ear for 10-inch cabinet rack mounting (RKE-10A)
and 19-inch cabinet rack mounting (RKE-10B) is available upon
request.
When choosing a location, please keep in mind the environ-
mental restrictions discussed in Chapter 1, Section 4, Product
Specification.
Connection to the Switch requires UTP Category 5 network
cabling with RJ-45 tips. Please see the Appendex A for more
information.