Sharp AR-C260P Key Operator's Manual page 30

Detailed menu of key operator program settings
LEVEL1
[OK]
ACCOUNT CONTROL
[BACK/C]
See pages
[ ] [ ]
23 to 25
ENERGY SAVE
See page 26
[ ] [ ]
OPERATION PANEL
SETTINGS
See page 26
[ ] [ ]
DEVICE SETTINGS
See pages
[ ] [ ]
27 to 28
COLOUR ADJUSTMENT
[ ] [ ]
KEY OPERATOR CODE
CHANGE
[ ] [ ]
PRINT KEY OPERATOR
PROGRAMS LIST
[ ] [ ]
SYSTEM SETTINGS
[ ] [ ]
PRODUCT KEY
See page 31
LEVEL2
[OK]
EASY CALIBRATION
[ ] [ ]
COLOUR BALANCE
[ ] [ ]
TEST PRINT
[BACK/C]
[OK]
Enter the current code
number.
[BACK/C]
To enter numbers, see
page 4.
[OK]
Printing will start.
This program is explained
on page 20.
[OK]
DEFAULT SETTINGS
[BACK/C]
[ ] [ ]
INTERFACE SETTINGS
See page 30
[ ] [ ]
NETWORK SETTINGS
See page 30
[ ] [ ]
INITIALISE/STORE
SETTINGS
See page 31
DESCRIPTION OF PROGRAMS
LEVEL3
[OK]
Press "OK" to print a test page. Select the X axis
position (magenta) and Y axis position (yellow). This
[BACK/C]
program is explained on page 13.
[OK]
Press "OK" to print a test page. Select the low, mid,
and high density values for cyan, magenta, yellow, and
[BACK/C]
black. This program is explained on page 13.
[OK]
Printing will start.
This program is explained on page 13.
[OK]
Enter the new code
number.
[BACK/C]
To enter numbers, see
page 4.
[OK]
DISABLE NOTICE PAGE
PRINTING
[ ] [ ]
[BACK/C]
DISABLE TEST PAGE
PRINTING
[ ] [ ]
A4/LT AUTO SELECT
[ ] [ ]
DELETE HOLD DATA
[ ] [ ]
OUTPUT METHOD WHEN
MEMORY FULL
[ ] [ ]
BYPASS PAPER TYPE
LEVEL4
[OK]
The setting is stored
(return to level 1).
This program is explained
on page 20.
[OK]
Press the [ ] or [ ] key
to select YES or NO.
[BACK/C]
[OK]
The setting is stored.
This program is explained
on page 20.
[OK]
Press the [ ] or [ ] key
to select YES or NO.
[BACK/C]
[OK]
The setting is stored.
This program is explained
on page 20.
[OK]
Press the [ ] or [ ] key
to select ON or OFF.
[BACK/C]
[OK]
The setting is stored.
This program is explained
on page 20.
[OK]
DELETE HOLD DATA
-OK?
[BACK/C]
[OK]
The data is cleared.
This program is explained
on page 20.
[OK]
Press the [ ] or [ ] key
to select 1SET or MULTI.
[BACK/C]
[OK]
The setting is stored.
This program is explained
on page 20.
[OK]
Press the [ ] or [ ] key
to select the paper type.
[BACK/C]
[OK]
The setting is stored.
This program is explained
on page 20.
29