Sharp AR-C260P Key Operator's Manual page 20

Easy Calibration (additional information for Steps 4 through 8 on the previous page)
Easy Calibration is performed by selecting the desired colour of grey (processed grey), which is a
combination of cyan, magenta, and yellow.
[Test Pattern 2 (printed by printer)]
Easy Calibration Testpage (1/2)
Yellow
(-3~+3)
Test patterns 2 and 3 indicate processed grey colours with the current grey colour as the reference
point or origin ("0").
G
The X axis shows the density of magenta in seven increments from -3 to +3 (-3 to 0 in test pattern 2 and 0
to +3 in test pattern 3).
G
The Y axis shows the density of yellow in seven increments from -3 to +3.
G
The density of cyan is constant.
Select the processed grey colour that you prefer
1
from test pattern 2 or test pattern 3.
For example, if you prefer the colour indicated above
in test pattern 3, select "+1" for X and "-2" for Y.
Enter the X and Y coordinates of the colour you
2
prefer in steps 5 through 8 on the previous page.
[Test Pattern 3 (printed by printer)]
Easy Calibration Testpage (2/2)
Magenta Magenta
(-3~ 0) ( 0~+3)
±
±
Example:if this is
the desired
colour, select
"+1" for X and
"-2" for Y.
DESCRIPTION OF PROGRAMS
Yellow
(-3~+3)
19