Sharp AR-C260P Key Operator's Manual page 29

DESCRIPTION OF PROGRAMS
Detailed menu of key operator program settings
LEVEL1
[OK]
ACCOUNT CONTROL
[BACK/C]
See pages
[ ] [ ]
23 to 25
ENERGY SAVE
See page 26
[ ] [ ]
OPERATION PANEL
SETTINGS
[ ] [ ] See page 26
DEVICE SETTINGS
[ ] [ ]
COLOUR ADJUSTMENT
See page 29
[ ] [ ]
KEY OPERATOR CODE
CHANGE
See page 29
[ ] [ ]
PRINT KEY OPERATOR
PROGRAMS LIST
See page 29
[ ] [ ]
SYSTEM SETTINGS
See pages
[ ] [ ]
29 to 31
PRODUCT KEY
See page 31
28
LEVEL2
[OK]
DISABLE DUPLEX UNIT
See page 27
[ ] [ ]
DISABLE INVERTER
UNIT
See page 27
[ ] [ ]
DISABLE STAPLER UNIT
See page 27
[ ] [ ]
DISABLE PAPER DESK
DRAWERS
[BACK/C]
See page 27
[ ] [ ]
DISABLE FINISHER
See page 27
[ ] [ ]
DISABLE LARGE
CAPACITY TRAY
See page 27
[ ] [ ]
DISABLE SHIFTER UNIT
See page27
[ ] [ ]
SADDLE STITCH ADJUST
See page 27
[ ] [ ]
AUTO PAPER SELECTION
SETTING
[ ] [ ]
See page 27
REGISTRATION
ADJUSTMENT
[ ] [ ]
SECURITY SETTINGS
Press the [ ] or [ ]
key to select 1 to 7
for the number of
clear repetitions.
[OK]
The setting is stored.
This program
explained on page 12.
LEVEL3
[OK]
AUTO ADJUSTMENT
[ ] [ ]
MANUAL ADJUSTMENT
[OK]
CLEAR ALL MEMORY
[ ] [ ]
[BACK/C]
POWER UP AUTO CLEAR
[BACK/C]
[ ] [ ]
[OK]
AUTO CLEAR AT JOB
END
[BACK/C]
is
LEVEL4
[OK]
Press [OK] as instructed
by the message to begin
auto adjustment (when
[BACK/C]
adjustment ends, press
[BACK/C] to return to
level 3).
This program is explained
on page 9.
[OK]
Press [OK] as instructed
by the message to print
[BACK/C]
test pages and then
adjust manually. This
program is explained on
pages 9 and 10.
Memory clear begins.
When finished, the
machine restarts. This
program is explained on
page 11.
[OK]
[OK]
CLEAR ALL MEMORY
-OK?
[ ] [ ]
REPEAT COUNT OF THE
SELECTED PROGRAM
[OK] [BACK/C]
LEVEL5
Press the [ ] or [ ]
key to select 1 to 7
for the number of
clear repetitions.
[OK]
The setting is stored
(return to level 5).
This program is explained
on page 11.
[OK]
Press the [ ] or [ ]
key to select ON.
[BACK/C]
[OK] [BACK/C]
LEVEL5
Press the [ ] or [ ]
key to select 1 to 7
for the number of
clear repetitions.
[OK]
The setting is stored
(return to level 5).
This program is explained
on page 11.