Entering The Numerical Commands; Operating The Radio (Fm); Selecting [Fm] As The Source; Screen Configuration - Pioneer AVIC-Z2 Operation Manual

Entering the numerical com-
mands
You can use this function when you need to enter
a numerical command during DVD playback.
1
Touch [10Key Search] and then touch
[10key Mode] (10key mode).
2
Touch 0 — 9 to input the desired number.
3
While the input number is displayed,
touch [Enter].

Operating the Radio (FM)

You can listen to the radio by using the navigation
system. This section describes operations for
Radio (FM).

Selecting [FM] as the source

1
Touch the source icon and touch [FM].
➲ For details, refer to "Selecting a source" ➞
Page 103

Screen configuration

(1) (2)
(5)
(1) Source icon
Shows which source has been selected.
(2) Band indicator
Shows which band the radio is tuned to: FM1 to
FM3.
(3) Preset number indicator
Shows what preset has been selected.
(4) Frequency indicator
Shows to which frequency the tuner is tuned.
(5) Preset list display
Shows the preset list.
(6) LOCAL indicator
Shows when local seek tuning is on.
(7) STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
(3) (4) (7)
(6)
113