Pioneer AVIC-Z2 Operation Manual page 193

Symptom
Nothing is displayed and the touch
panel keys cannot be used.
Touch panel key is not responding or
a different key is responding.
CD recording is not possible.
CD recording doesn't stop though
the record progress indicator shows
100%.
"NO SIGNAL" is displayed at the right
corner on the map.
"UPDATING" is displayed at the right
corner on the map.
No sounds are heard.
The volume level will not rise.
The icon is displayed, and opera-
tion is not possible.
Cause
When the shift lever is in [R], the rear
view camera images are displayed.
(When [MIRROR] is selected in
[REAR SCREEN] menu.)
[DVD-V Setup] is carried out.
The setting for the rear view camera
is incorrect.
The shift lever was placed in [R]
when the rear view camera was not
connected.
The back light of the LCD panel is
turned off.
Touch keys deviate from the actual
positions that respond to your touch
for some reason.
A disc that cannot be recorded, such
as MP3 disc or DVD-video, is
inserted.
Music Library recording will be can-
celed after playback of the current
track is finished. (The recording
mode stops at the interval of the
tracks.)
While waiting for a response from
the XM tuner.
You are in an area that cannot
receive XM tuner reception.
Your current location provides very
poor reception.
Service subscription is either
XM audio only or XM NavTraffic
stand alone.
Cables are not connected correctly.
The system is performing still, slow
motion, or frame-by-frame playback
with DVD-video.
The system is paused or performing
fast rewind or forward during the
MP3 disc playback.
"DTS" is selected for the DVD-Video
disc sound track.
The operation is not compatible with
the DVD's configuration.
Action (See)
Select [DVD] or [AV] in [REAR
SCREEN] menu. When you move
the shift lever to a position other than
[R], the screen will be returned to the
previous display.
You can not display the video image
to "Rear display" during [DVD-V
Setup] menu.
Connect a rear view camera cor-
rectly.
Press the AV button to return to the
source display and then select the
correct polarity setting for [Camera
Input].
➲ About [Camera Input] setting ➞
Page 156
Press the V button to turn on the
back light.
Perform the touch panel calibration.
"Adjusting the Response Positions of
the Touch Panels (Touch Panel Cali-
bration)" ➞ Page 182
A disc other than a normal music CD
cannot be recorded.
Wait until the current track has
ended or change the source manu-
ally.
Wait for a while and try the operation
again.
Move into an area that can receive
XM tuner reception.
Change your location.
Since the GEX-P10XMT is capable of
receiving both XM audio and XM
NavTraffic service, if you are sub-
scribed to only one or the other, the
system checks to see if you have
added another service to your
account since you last powered on
the navigation system. When you
subscribe to both services, this mes-
sage will stop appearing when you
turn the ignition ON (ACC ON).
Connect the cables correctly.
There is no sound during still, slow
motion, or frame-by-frame playback
with DVD-video.
For an MP3, there is no sound on fast
rewind or forward.
Switch to a non "DTS" sound track.
This operation is not possible. (For
example, the DVD playing does not
feature that angle, audio system,
subtitle language, etc.)
191