Entering The Numerical Commands; Operating The Radio (Fm); Selecting [Fm] As The Source; Screen Configuration - Pioneer AVIC-HD1BT Operation Manual

MAN-HD1BT-SOFTW-EN.book Page 95 Thursday, April 20, 2006 3:47 PM
Entering the numerical com-
mands
You can use this function when you need to enter
a numerical command during DVD playback.
1
Touch [10Key Search] and then touch
[10key Mode] (10key mode).
2
Touch 0 – 9 to input the desired number.
3
While the input number is displayed,
touch [Enter].

Operating the Radio (FM)

You can listen to the radio by using the navigation
system. This section describes operations for
Radio (FM).

Selecting [FM] as the source

1
Touch the source icon and touch [FM].
For details, refer to "Selecting a source"
Page 85

Screen configuration

(1) (2) (3) (4) (5) (6)
(11)
(1) Source icon
Shows which source has been selected.
(2) Band indicator
Shows which band the radio is tuned to FM1 to
FM3.
(3) PTY indicator
Shows the programme type of current station
(when available).
(4) TRFC indicator*
Shows the status of traffic announcement.
(5) NEWS indicator*
Shows the status of news programme.
(6) TEXT indicator
Shows when the radio text is received.
(7) STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
(8) LOCAL indicator
Shows when local seek tuning is on.
(9) Preset number indicator
Shows what preset has been selected.
(10) Programme service name indicator
Shows the programme service name (station
name) of current station. If the programme ser-
(7)
(8)
(10)
(9)
95