Philips WP3822 User Manual page 20

English
0
Problem
The
display suddenly
goes empty.
The appliance
makes a clicking
sound when I
use it at the
filtered spray
setting.
Product specifications
Product name and type
number
Solution
Perhaps the poles of the battery point in the wrong
direction. Insert the battery in the correct way (see
section 'Inserting the battery' in chapter 'Preparing
for use').
Perhaps the battery compartment cover is not
properly fitted. Reattach the battery compartment
cover in the correct way (see section 'Inserting the
battery' in chapter 'Preparing for use').
Perhaps the water purifier is set to the unfiltered
spray setting or the unfiltered stream setting. In
these cases, the display is off. The display only works
when the water purifier is set to the filtered spray
setting.
Perhaps the battery is low. Replace the battery.
Perhaps the filter cartridge is clogged and the water
flow is extremely low. Replace the filter cartridge.
The clicking sound comes from the built-in flow
meter and is normal.
Pure water on tap WP3822