Removing The Defective Ras - Patton electronics 2960 Getting Started Manual

Model 2960/2996 RAS Getting Started Guide
4. To save the displayed data as a text file, select the
ple, under Netscape, select
the export parameters to a text file. Select the location where you want the file stored, type a file name, and
click .
Save
Figure 39. Saving the access server flash memory configuration data as a text file

Removing the defective RAS

1. Remove the replacement RAS from its shipping container and place it near where the malfunctioning RAS
is located.
2. Unplug both male power cable connectors from their outlets.
3. Rotate the power cord retainer clips out of the way, then remove both power cables from the malfunction-
ing RAS.
4. Disconnect and label the following cables from the malfunctioning RAS:
– the T1/E1/PRI WAN cables
– the RS-232 CONFIG cable
– the 10/100 ETHERNET cable
5. Disconnect the ground wire from the grounding stud.
6. If the RAS is mounted in a rack, remove it from the rack.
7. Place the malfunctioning RAS in the container that the replacement RAS came in so you can return the
RAS for repair.
Maintenance
Save
. A dialog box will display enabling you to save the contents of
>
File Save As
5 • Troubleshooting and maintenance
option on your browser (see figure 39). For exam-
61