Switches S2-1: 19.2 Kbps Or 144 Kbps Synchronous Rate Enable; Switch S2-2: Front Panel Switch Disable; Switches S2-3: Response To Local Line Loop Requests From Dte; Switches S2-4 And S2-5: Not Assigned - Patton electronics NetLink 1082/144 User Manual

Switches S2-1: 19.2 kbps or 144* kbps Synchronous Rate Enable
Use switch S2-1 to allow the Model 1082 and Model 1082/144 to operate
at the 19.2 kbps synchronous data rate, or to enable the Model 1082/144
to operate at the 144* kbps synchronous data rate.
S2-1 Activation
Off Disabled
On Enabled
Note To operate at 19.2 kbps or 144 kbps, set switches S1-1 and S1-2
to the OFF position and switch S2-1 to ON (see section "Configur-
ing DIP Switch S1" on page 9).

Switch S2-2: Front Panel Switch Disable

Use switch S2-2 to enable or disable the front panel toggle switches.

Switches S2-3: Response to Local Line Loop Requests from DTE

Use switch S2-3 to enable Local Line Loopback from the local DTE inter-
face (See "Local Line Loopback (LLB)" on page 22).
S2-3 Activation
Off Disabled
ON Enabled

Switches S2-4 and S2-5: Not Assigned

* 144 kbps data rate is only available on the Model 1082/144.
19.2 kbps rate is available on all Model 1082 series modems except
for the 1082/144.
Synchronous data rate is 32–128 kbps as
defined by switches S1-1 and S1-2
Model 1082 operates at synchronous 19.2 kbps
data rate (see note). The Model 1082/144 operates
at 144 kbps synchronous data rate (see note)
S2-2
On Disable the front panel switches
Off Enable the front panel switches
Ignore Line Loop Back request from DTE interface
Respond to Line Loop Back request from DTE
Description
Setting
Description
interface
13