Part# 07M2192 Rev. A Doc# 09401U2-001 Revised 10/26/04 An ISO-9001 Certified Company USER MANUAL Model 2192/USB/V.92 USB Modem SALES OFFICE +1 (301) 975-1000 TECHNICAL SUPPORT +1 (301) 975-1007 www.patton.com...
1.0 COMPLIANCE AND TRADEMARKS 1.1 FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The REN is useful in determining the quantity of devices you may con- nect to your telephone line and still have those entire devices ring when your telephone number is called. In most, but not all area, the sum of the RENs of all devices connected to one line should not exceed five (5).
2.2 V.92 FEATURES The Patton 2192 USB modem is compatible with the V.92 modem stan- dard and, when operated in conjunction with services provided by your local phone company and Internet service provider (ISP), provides the following capabilities:* •...
• Modem-on-Hold • V.44 Data Compression QuickConnect Allows your modem to connect to the ISP faster than before. Very simply, QuickConnect shortens the time it takes to make a connection by remembering the phone line and ISP characteristics, then storing them for later usage.
• Section , “Congratulations! The modem is installed.” on page 13 3.1 SETTING UP THE MODEM IN WINDOWS 98 This section describes how to install your Model 2192 USB modem in Windows. When installed, the installation should look like the diagram shown in Figure 1.
Page 8
1. Insert the CD into your CD-ROM and the system will execute the setup.exe automatically. The Figure 2) will appear. Click driver. Figure 2. Modem Installation window Setup Complete 2. When the Click Figure 3. Modem Installation window—Setup Complete Modem Installation window (see to begin installing the modem message displays (see Figure 3),...
Page 9
3. Connect one end of the USB cable supplied with the modem to the USB port on the modem (see Figure 4). 4. Connect the other end of the cable to one of the PC’s USB ports. The port is usually labeled with the symbol shown in Figure 5. Figure 4.
Page 10
6. Plug the other end of the RJ-11 cable into the modular jack on the wall outlet or optional T adapter. 7. Verify that the red POWER LED on the modem (see Figure 7) is lit. Figure 6. RJ-11 port location Figure 7. Model 2192 LEDs...
Congratulations! The modem is installed. 3.2 SETTING UP THE MODEM IN WINDOWS ME This section describes how to install your Model 2192 USB modem in Windows. When installed, the installation should look like the diagram shown in Figure 1 on page 7.
Congratulations! The modem is installed. 3.3 SETTING UP THE MODEM IN WINDOWS 2000 This section describes how to install your Model 2192 USB modem in Windows. When installed, the installation should look like the diagram shown in Figure 1 on page 7.
Congratulations! The modem is installed. 3.4 SETTING UP THE MODEM IN WINDOWS XP This section describes how to install your Model 2192 USB modem in Windows. When installed, the installation should look like the diagram shown in Figure 1 on page 7.
Page 14
Note The connection diagram in Figure 1 on page 7 includes an optional RJ-11 modular T adapter so the USB modem and a telephone can share the same telephone wall jack. If you will not be sharing the wall jack, it is not necessary to install a T adapter. 1.
Page 15
7. Insert the CD into your CD-ROM and the system will execute the setup.exe automatically. The Figure 2 on page 8) will appear. Click modem driver. Setup Complete 8. When the page 8), Click Congratulations! The modem is installed. Modem Installation message displays (see Figure 3 on window (see to begin installing the...
4.0 SETTING UP AND USING MODEM-ON-HOLD The modem-on-hold feature requires the following: • Internet service from an ISP that supports V.92—Verify that your ISP supports V.92 MOH. Be sure to ask how long an Internet call can be left on hold before your Internet session will be disconnected. •...
Page 17
The SmartUSB56 Voice Modem Properties control panel displays (see Figure 13). Figure 13. V.92 Features panel Modem on Hold Enable 2. Click the tab (see Figure 13). Verify that the Incoming Modem on Hold box is checked (see Figure 14). Figure 14.
3. Select what you want the modem to do when a phone call is received while you’re online (see Figure 14 on page 17). 4. Click the OK button to save changes and close the control panel. Selecting the country/area 1.
3. Select the country or area where the 2192 Modem is installed by selecting from the Enabling the speaker (optional) 1. Click on the Speaker tab (see Figure 17). You can choose to enable your PC speakers to play sounds representing activities of the modem.
Soft Speaker > Enabled 2. Click on the 3. Move the speaker volume slider (see Figure 17 on page 19) to the desired setting. 4.2 CONNECTING AND LOGGING ONTO YOUR ISP Connect to your ISP as usual. After connecting, you will see an the system tray (see Figure 18), indicating that the modem is online.
Making an outgoing call while online 1. To make an outgoing call while online, click on the system tray, the SmartUSB56 Voice Modem panel displays (see Figure 19) Figure 19. SmartUSB56 Voice Modem panel Modem On Hold 2. Select the Make a Phone Call 3.
Note Your ISP controls how long the Internet connection can be on hold. 5. When your call is complete, click on the Resume my Internet Con- nection button (see Figure 20 on page 21). While your Internet connection is resuming, you will see the Connection window (see Figure 21).
Page 23
nection (see Figure 22). You will also hear a ringing sound if you have configured the Speaker enabled. Figure 22. Receiving Phone Call window 3. If you choose to answer the call, the changes to show the Figure 23. Receiving Phone Call window with Remaining hold time timer You now can pick up a telephone handset and start your conversation.
Page 24
Note If you do not finish your call before the timer expires, your voice call will automatically be disconnected and you may also lose your Internet connection. To avoid this, there are two workarounds: • Ask the person to whom you are speaking to hang up before the timer expires and call you back in a minute.
5.1 WINDOWS 98/ME Start > Settings >Control Panels 1. Select Modems icon. Diagnostics 2. Click on the COM Port 3. Select the Info… button to start the test. 4. If your modem is responding to AT commands correctly, it means that your modem is working properly.
Need help?
Do you have a question about the 2192 and is the answer not in the manual?
Questions and answers