Creating A Bridge Group - Patton electronics 6081RC EdgeRoute Application Manual

3 • Bridged data application
3. Click the Add Bridge button (see
Note
4. Now that the bridge group has been created, click on Bridge 1 group ID hyperlink, this action will take
Bridge 1 Configuration
you to the
through stored bridge configuration:
– The Refresh Page button forces the 3224 or 6081RC to display changes made since the previous
refresh cycle
– The First Bridge button displays the configuration for the first bridge in the
listing of bridges (see
– The Previous Bridge button displays the configuration for the bridge previous to the one
currently displayed
– The Next Bridge button displays the configuration for the bridge following the one currently displayed
– The Last Bridge button displays the configuration for the last bridge in the
listing of bridges (see
– The Reset button cancels changes made to a bridge configuration.
26
Models 3224 G.SHDSL IpDSLAM & 6081RC NAS Applications Guide
Figure 20. Bridge Configuration window showing new bridge
figure 19), to display the new bridge as shown in
If you want to delete a bridge configuration from the listing, click the
Delete
check box for the bridge you want removed, then click the
Delete Bridge(s) button.
Figure 21. Bridge Configuration Options
page (see
figure 19 on page 25).
figure 19 on page 25)
figure 21). This page provides several buttons for navigating
figure 20.
Bridge Configuration
page
Bridge Configuration
page

Creating a bridge group