Models 3224 G.SHDSL IpDSLAM & 6081RC NAS Applications Guide
4. Go to the main menu and click on Configuration -> IP Routes to reach the
Route Configuration
5. At the
6. Click on the Update button.
Note
This concludes RIP configuration for the Model 3201.
PPP layer configuration
Figure 47. Route Configuration page
page, enter Destination, Gateway, and Netmask information as shown above.
The Gateway address in the example above points to the address for
DSL port 3. In normal deployments, you will have to add a WAN
gateway address for each of the DSL links up to 24. To add routes,
click on the Create new Ip V4Route link.
6 • Configuring the remote site router
Routing Configuration
page.
51