Wep2; Wep Key - Patton electronics EtherBITS 2211 Getting Started Manual

Models 2211 & 2232 Getting Started Guide

WEP2

The WEP2 field selects whether ASCII code or hexadecimal code will be used to represent the data values
in WEP1.

WEP Key

The WEP Key field is for user authentication. If the WEP1 value is 64 bits, the user must enter a 5-characters
ACSII password in ASCII mode or 10-digit hexadecimal password in hexadecimal mode. If the WEP1 value is
128 bits, the user must enter a 13-characters ASCII password in ASCII mode or 26-digit hexadecimal pass-
word in hexadecimal mode. For example, if WEP2 is set as a hex code type, the user could enter 0123456789
(when WEP1 is set to 64 bits), or 0123456789ABCDEF0123456789 (when WEP2 is set to 128 bits).
The basic set commands for wireless LAN (wlan) settings are as follows:
set wlan SSID type National_code ch WEP1 WEP2 WEP_Key
- SSID: Max 32 character(Use double quotation mark to include space character)
- type: i=infrastructure / a=AdHoc
- National_Code:
1.USA/2.Canada/3.EU,Australia/4.Spain/5.France/6.Korea/7.Japan/8.Others
- ch: set channel number when adhoc mode
- WEP1: 0=none / 1=64bit / 2=128bit
- WEP2: a=ASCII type pass,h=Hexdecimal type pass
- WEP_Key: ASCII type = 5(64bit) or 13(128bit) character input,
- Hexdecimal type = 10(64bit) or 26(128bit) number input
Note
If the type is set as infrastructure, channel will be set to the same value of the
connected AP internally regardless of the value set by the user.
The following examples show the commands needed to configure the device server's wireless LAN settings:
• SSID=Default, National Code=Korea, infrastructure , arbitrary channel number, WEP Key disabled
> set wlan Defalut i 6 * 0(National Code: Korea, WEP Key disabled)
• SSID=Default, National Code=Korea, Adhoc , channel number=4, WEP Key disabled
> set wlan Default a 6 4 0
• SSID=Default 1, National Code=Korea, Adhoc , channel number=4, WEP Key disabled (If there are space
characters in SSID, you should use a double quotation mark to set SSID.)
> set wlan "Default 1" a 6 4 0
Settings
3 • Wireless LAN configuration (Model 2211 only)
33