Speaker Connections; Fuse; Maintenance - Panasonic CQ-FX321N Operating Instructions Manual

Speaker Connections

E
N
G
L
I
S
Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
H
21
<Right>
(White)
+
L
-
(White
w/black stripe)
(Gray)
+
R
-
(Gray
w/black stripe)
<Wrong>
+
L
-
Chassis
+
R
-
Chassis
¡Never connect the speaker cord to
the body of the car.

Fuse

Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse, could cause fire or damage to the unit.
If the fuse replacement fails, contact your nearest authorized Panasonic Service Center.

Maintenance

Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine exterior
cleaning. Never use benzine, thinner, or other solvents.
26
CQ-FX421/FX321N
¡Use ungrounded speaker only.
+
¡The maximum speaker output should be 45 W or more. (If used with
-
the optional power amplifier, the speaker output should be higher than
the maximum amplifier output.)
¡The speaker impedance should be 4 - 8 Ω.
+
¡This unit uses the BTCL circuit, so each speaker should be connected
-
separately using parallel vinyl insulated cords.
¡The speaker cords and the power amplifier unit should be kept away
(about 30 cm apart) from the antenna and antenna extension cord.
+
L
-
+
R
-
¡Do not use a 3-wire type speaker
system having a common earth
lead.
+
+
-
-
+
+
-
-
+
+
L
-
-
+
+
R
-
-
¡Do not connect more than one
speaker to one set of speaker
leads.
+
-
+
-