Panasonic CQ-FX321N Operating Instructions Manual page 22

Installation
E
N
G
L
I To Remove the Unit
S
q
H
Remove the removable
face plate.
17
(a) Open the face plate.
(b) Push the face plate
to either the right
or left, then pull it
out toward you.
w
Remove the trim plate t with a screwdriver.
e
Pull out the unit while pushing down the lock
lever with a screwdriver.
r
Remove the unit pulling with both hands.
Cautions:
¡Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.
¡If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
¡Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or it might be
damaged.
22
CQ-FX421/FX321N
(continued)
Open
OPEN OPEN
PTY
PWR
q Open
tTrim Plate
Contact
w Push
e Pull out
Screwdriver
1
2
Lock Lever
Screwdriver