Repeat Play; Blank Skip; Dolby Noise Reduction - Panasonic CQ-FX321N Operating Instructions Manual

Metal Tape Mode
¡ Press [1](MTL) when playing metal or chromium
dioxide (CrO ) tapes.
2
¡ Press [1](MTL) again to cancel.
Note: Playing non-metal tapes in MTL mode causes
high frequency imbalance, which affects tone quality.

Dolby Noise Reduction

¡Press [2](NR) to set the Dolby B NR mode.
¡ Press [2](NR) again to cancel.
B
Note: Set the Dolby B NR mode when playing back a
tape recorded with Dolby B Noise Reduction.
Tape Program Search (TPS) Operation
q Press [3](TPS) to activate the Tape Program Search mode.
w To select a desired program, press [2TRACK] or [1TRACK]
corresponding times to go forward (up to 9) or backward (up to 8).
(Rewind:) (Fast forward:)
8t 0 1
e Press [3](TPS) again to cancel.
BAND BAND
VOL
TUNE TUNE
SEL
TRACK TRACK
S•HDB
CASSETTE RECEIVER WITH CHANGER CONTROL
1 1
MTL MTL
DISP
MTL
s9
Notes:
The TPS mode may not work correctly in the following cases. This,
however, does not mean that the unit is defective.
¡There is an interval less than 3 seconds or having a high level of
noise or hum between programs.
¡There is particularly low-level passage during the program.
Lights when a tape is in the deck
CQ-FX421N
RANDOM SCAN
2 2 3 3 4 5 5 6 6
NR NR TPS TPS B·S B·S REP REP

Repeat Play

¡Press [6](REP) to repeat the current
program.
¡Press [6](REP) again to cancel.

Blank Skip

¡Press [5](B • S) to skip unrecorded portions
longer than 15 seconds on the tape.
¡Press [5](B • S) again to cancel.
Note: When repeat is on, the blank skip does
not work because the repeat has priority over
the blank skip.
OPEN
PTY
PWR
SOURCE SOURCE
EON PTY CT
E E
TA
AF
SUB·W
REP
B-SKIP
CQ-FX421/FX321N
E
N
G
L
I
S
H
12
17