Speaker Connections - Panasonic CQ-5101U Operating Instructions Manual

Speaker Connections

Caution
Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
<Right>
(White)
+ +
L
-
-
(White
w/black stripe)
(Gray)
+
+
R
-
-
(Gray
w/black stripe)
<Wrong>
+
+
L
-
-
Chassis
+
+
R
-
-
Chassis
• Never connect the speaker cord to
the body of the car.
Product Servicing
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized
Panasonic Servicenter. The product should be serviced only by a qualified technician.
Maintenance
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine
exterior cleaning. Never use benzine, thinner, or other solvents.
Fuse
If the replaced fuse fails, contact your nearest authorized Panasonic Servicenter.
Warning
• Use fuses of the same specified rating (15 A). Using substitutes or fuses with higher ratings, or connecting the
unit directly without a fuse could cause fire or damage to the unit. If the replaced fuse fails, contact your
nearest authorized Panasonic Servicenter.
22
CQ-5101U
• Use ungrounded speaker only.
• The maximum speaker input should be 37 W or more. (If used with the optional
power amplifier, the speaker input should be higher than the maximum amplifier
output.)
• The speaker impedance should be 4 - 8 Ω.
• This unit uses the BTCL circuit, so each speaker should be connected separately
using parallel vinyl insulated cords.
• The speaker cords and the power amplifier unit should be kept away (about 30 cm
apart) from the antenna and antenna extension cord.
+
L
-
+
R
-
• Do not use a 3-wire type speaker
system having a common earth
lead.
+
+
L
-
-
+
+
R
-
-
• Do not connect more than one
speaker to one set of speaker
leads.
+
+
-
-
+
+
- -