Changing To Dss Button; Changing To One Touch Dialing Button - Panasonic EASA-PHONE KX-T61610 Installation Manual

PRESS "CO"
WHICH YOU
WANT TO
CHANGE TO
DSS BUTTON
DIAL "1"
DIAL
EXTENSION
NUMBER
PRESS
"MEMORY"
Dialirzg (Inter Office Calling)
LIFT HANDSET
OR PRESS
"SP-PHONE"
FRESS "CO"
WHICH HAS
BEEN CHANGED
TO DSS BUnON
Description
Allows each CO button to change to a DSS
(Direct Station Selection) button. DSS button
can be used instead of dialing an extension nl(nz-
ber.
Operation
Settirzg
0 Be sure the handset is on the cradle and the
SP-PHONE button is off.
OSet the MEMORY switch of the proprietary
telephone to "PROGRAM".
1. Press the CO button which you want to change
to a DSS buttom
When pressing the CO 1, "CO 1"' will be
displayed.
2. Dial (1).
"EXT" will be displayed.
3. Dial the extension nunzber (11 through 26).
When dialing (ll), "EXT 11" will be dis-
played.
4. Press the MEMORY button.
OAfter programming, return the MEMORY
switch to
the
"SET' position.
Dialing (Itzter OfJice Calling)
I. Lift the kadset or press the SP-PHONE but-
ton.
2.
Press the CO _button which has been changed
to DSS button.
Condition
If you program the same extension number as
another CO or DSS button, the original one will
be cleared.
PRESS "CO"
WHlCli YOU
WANT TO
CHANGE TO
ONE TOUCH
DIALING
DIAL "2" DIAL "9" DIAL
PHONE
NUMBER
~YOU may dial 81 through
86 instead of 9.
PRESS
"MEMORY"
Description
Allows each CO button to be used as a one touch
dialirlg memory locatiotl. Up to 16 digits cat1 be
stored in each CO buttoll.
Operation
9 Be sure the handset is on
the
cradle and
rite
SP-PHONE button is off.
*Set the MEMORY switch of the proprietary
telephone to "PROGRAM".
1. Press
the
CO button which you watlt to use as
a one touch dialing memory location.
When pressing CO 1 buttoll, "CO 1" will be
displayed.
2. Dial (2).
3. Dial (9).
9 You may dial 81 through 86 instead of 9 to
select the desired trunk.
4. Dial the phone number.
.
5. Press the MEAIORY button.
l
After
programming, returtz the
MEMORY
switch to the "SET" position.
16
- _