Call Waiting - Panasonic EASA-PHONE KX-T61610 Installation Manual

To terminate the original call and talk to the new caller.
-
WILL HEAR A
CALL WAITING
TONE
PRESS "CO" OR "ICM"
WHOSE INDICATOR
IS FLASHING
CIUICKLY
TALK
To place the original call on hold and talk to the new caller.
elf both original call and new call are intercom calls:
(The ICM indicator will change lighting intoflashing quickly when new call reaches.)
WILL HEAR A PRESS
CONSULT WITH
PRESS "ICM" TO
CALL WAITING
"HOLD"
THE NEW CALLER TERMINATE THE
TONE WH!LE THE
2ND CALL AND TO
ORIGINAL CALL IS
RETURN TO THE
ON HOLD
ORIGINAL CALL
*If original call is CO call, and new call is CO call or intercom call:
or
If
original call is intercom call and new call is CO ca'll:
WILL HEAR A
CALL WAITING
TONE
PRESS
"HOLD"
PRESS "CO" OR "SM"
WHOSE INDICATOR'
IS FLASHING
OUICKLY
ON HOLD
I
I
PRESS "CO" or"lCM" WHOSE
INOICATOR IS FLASHING SLOWLY TO
TERMINATE THE 2ND CALLAND TO
RETURN TO THE ORIGINAL CALL
Description
3. Consult with the new caller.
Call-waiiing tone during a conversation indi-
cates there is a new incoming CO line call or
Intercom call.
This feature is required to be set beforehand in
the KX-T61610.
For programming, see page 3-28.
Operation
To ierminate the original chll and talk tq the new
caller.
1. You will hear a call waiting tone (3 beeps).
2. Press the CO or ICM button whose indicator
is flashing quickly. The original call is now
terminated.
3.
Start f&king.
_. _._
To place-the ariginal call on hold and talk to' the.
new caller.
"If both original call and new call are intercom
tails:
(Th'e ICM indicator will chpnge lighting into'
flashing quickly when new call reaches.)
1.
You will hear a call waiting tone (3 beeps).
2. Press the HOLD button for placing a con-
versation on hold.
4. Press the ICM button to terminate the second
call and to return to the original call.
@If
original call is CO call, and new call is CO
call 'or intercom call:
or
If
original call is intercom call and new call is
co call:
1. You will hear. a call waiting tone.
2. Press the HOLD button for placing a
'conversation on hold. .
3. Press the CO or ICM button whose indicator
is f7ashing quickly.
4.
Consult with the new caller.
5. Press the CO or ICM button whose indicator
is flashing slow&&-terminate the.second call
and to return t?-&e original call.
Conditions '
4-16
e/f
a call waiting tone is heard and the CO ot
ICM indicator does not flash, this tone
indicates a "call waiting tone by special
_
company service.
In this case, see "Call Waiting-Outside
Line" on page 4-24. - -