Panasonic EASA-PHONE KX-T61610 Installation Manual page 37

Description
Conditions
If you select the automatic switching mode for
daylnight
service, enter the starting time.
Refer to "Switching Mode (DaylNight Service)"
page 3-12.
elf the NEXT button is pressed at step 3
through 7, the display will advance to the
"Night Time input" mode (step 9). The
operations of step 3 through 7 are not stored.
l
if
the PREV button is pressed at step IO
through 14, the display will return to the "day
time input" mode (step 2). The operations of
step 10 through 14 are not stored.
Programming
1. Dial (06).
"DAY/NIGHT TIME" will be displayed.
2. Press the NEXT button.
"DAY: 09:OO AM" will be displayed as a
default value and "09" will blink.
3. Enter the starting time for day service using 2
digits.
4. Press the "Q" button.
"00" will blink.
5. Enter the minute using 2 digits.
6. Press the "0" button.
"AM" will blink.
A
7. Press the SELECT button to alternate be-
tween "AM" and "PM" to select the correct
setting.
8. Press the MEMORY button.
9. Press the NEXT button.
"NIGHT: OS:00 PM" will be displayed as a
default value and "05" will blink.
10. Enter the starting time for night service using
2 digits.
11. Press the "0" button.
"00" will blink.
12. Enter the minute using 2 digits.
13. Press the 'IQ" button.
"PM" will blink.
14. Press the SELECT button to ,alternate be-
tween "AM" and "PM" to select the correct
setting.
1s. Press the MEMORY button.
16. To return to the initial program mode, press
the END button.
Example:
8.30 AM...
starting time for day plan
6:30 PM. . . starting time for night plan
Programming Table
See page 6-14.