Webcam; Inverterboard; Wireless Antenna - Packard Bell EasyNote SB Series Disassembly Manual

Webcam

1. Remove the LCD Assembly as described above
2. Remove LCD bezel as described above.
3. Disconnect the cable from the webcam.
4. Remove the 2 screws from the webcam module.
5. Lift out the webcam module.

Inverterboard

1. Remove the LCD Assembly as described above
2. Remove LCD bezel as described above.
3. Disconnect the 2 cables from the inverterboard.
4. Remove the screw from the inverterboard.
5. Remove the inverterboard; it is glued in place.

Wireless Antenna

1. Remove the LCD Assembly and Panel as described above
2. Remove the 2 screws of both the wireless antenna clips.
Fig. 24 One of the wireless antenna clips.
Fig. 23 The webcam.
EasyNote SB Disassembly Manual 16