Note: the screws stay attached to the cover.
3.
Lift the door out.
4.
The Wireless LAN adapter is located to the left side. Remove the two
screws securing the card and lift the card up.
5.
Now disconnect the WLAN antenna. Note the colour of each wire that
is attached to each connector, to ensure proper reconnection during re-
assembly.
6.
Remove the card from its slot.
Note: dependent on the model there may be 2 or 3 antennas. Some cards use ' main' and
' aux' instead of numbers to indicate the antenna connectors.
Fig. 13 The bottom base screws.
Fig. 14 Removing the wireless card.
EasyNote SB Disassembly Manual
10