Main Board - Packard Bell EasyNote ME Disassembly Manual

1919191919

Main Board

To remove the main board, remove the CPU (see
(see Memory), remove the wireless LAN adapter (see
(see Modem (Optional)), and then perform the following steps:
1. Disconnect the cable from the USB board (see
2. Release the brown clip to disconnect the button board flat cable from the main board.
3. Lift the metal RJ11 connector bracket aside and take out the DC jack.
4. Remove the tape securing the DC jack cable.
5. Remove the 2 screws marked with a white
6. Lift out the main board and turn it upside down.
Fig. 33 Location of button board flat cable.
Fig. 34 Location of markings on main board.
Packard Bell EasyNote ME Disassembly Manual
CPU Fan, Heat Sink and
Wireless LAN Adapter), remove the modem board
Fig 32).
on the main board.
CPU), remove the memory
19