Chapter 6 PC workstation wiring
Figure 29. Tracker Ethernet LAN connection to a PC workstation with one cable
54
Connecting with one cable
To make an Ethernet connection between the Tracker controller and a
Tracker PC Workstation using one cable, you need one CAT 5 crossover
cable.
1. Connect one end of the CAT 5 crossover cable to the RJ-45 Ethernet
LAN port on the bottom side of the Tracker controller (Figure 29).
2. Connect the other end of the cable to the RJ-45 Ethernet LAN port on
the Tracker PC Workstation.
RJ-45 Ethernet
LAN
port
(back)
CAT 5
crossover cable
Tracker
Controller
RJ-45 Ethernet
LAN
port
(bottom side)
®
BMTK-SVN01D-EN