Dimplex DF2608 Owner's Manual page 8

Fireplace Installation
the fireplace (Figure 2).
5. Place the Front Glass onto
the track of the fireplace
(Figure 2) and slide it along
the front until it reaches the
far left of the unit.
6. re-attach the right hand trim
piece using the three (3)
Philips screws from step 4.
Site Selection and
Preparation
This section provides instructions
for selecting a location and
preparing the site to install the
fireplace into your Dimplex mantel
surround.
1. select a suitable location that
is not susceptible to moisture
and is away from drapes,
furniture and high traffic.
2. For ease of electrical hook
up you may wish to locate
Figure 3
22 ⅞"
(580
mm)
8
27 ⅜"
(695 mm)
the fireplace near an existing
outlet (refer to noTE 1).
3. store the fireplace in a safe
dry and dust free location.
CAUTION: Clearance for
air circulation beneath the
fireplace is provided by two
(2) spacers. Do not install
fireplace directly on carpet
or similar surfaces which
may restrict air circulation.
If installing the fireplace in a
carpeted area, place a one-
piece, solid flat surface under
the fireplace. Ensure that
all feet rest securely on this
surface.
!
NOTE: The dimensions of
the fireplace with the trim are
27 ⅜ inch (695 mm) wide x
23 ½ inch (596 mm) high x
8 3/4 inch (222 mm) deep.
23 ½"
(596 mm)
26 ¼"
(663 mm)
www.dimplex.com
8 ¾"
(222 mm)