Fireplace Installation - Dimplex DWF36 Owner's Manual

Quick Reference guide
①
The electrical information
regarding your electric fireplace
can be found on the rating label
located on the bottom of the unit,
see above.
②
Before installation, please
record your fireplace's serial
number above for future
reference. The serial number can
be found on the Model and Serial
number Label of your fireplace.

Fireplace Installation

Site Selection
!
NOTE: A 15 Amp, 120
volt circuit is required. A
dedicated circuit is preferred
but not essential in all cases.
A dedicated circuit will be
required if, after installation,
the circuit breaker trips or the
fuse blows on a regular basis
when the heater is operating.
Additional appliances on the
same circuit may exceed the
current rating of the circuit
breaker.
CAUTION:
is in use, this product draws
a high, continuous electrical
current. not all electric
When the heater
③
If you have any technical
questions or concerns regarding
the operation of your electric
fireplace, or require service
contact customer service.
receptacles are designed to
work with high, continuous
currents. If you plan on using
this unit in an old, worn,
or loose receptacle, or are
unsure if the receptacle
is suitable, please have it
inspected by a qualified
electrician prior to using this
product.
WARNINg: Ensure the power
cord is not installed so that
it is pinched or against a
sharp edge and ensure that
the power cord is stored or
secured to avoid tripping or
snagging to reduce the risk of
fire, electric shock or injury to
persons.
7