Volvo XC90 Owner's Manual page 55

02 Instruments and controls
Switches in the centre console
3. Fold the door mirror inward and then out-
ward using the button.
02
The door mirrors have now returned to their
original fixed positions.
Park Assist*
The system is always activated
when the car is started. Press
the button to deactivate/reacti-
vate the parking assistance
system. See also page 145.
Deactivation of the deadlocks* and
detectors
Use this button when you wish
to switch off the deadlock func-
tion (doors cannot be opened
from the inside when locked).
This button can also be used
when deactivating the alarm
system's movement and tilt detectors*. The
lamp illuminates when these systems are shut
down/deactivated, see pages 120 and 124.
Auxiliary lamps*
Use this button to switch the
auxiliary lamps on with main
beam or to switch them off.
*
54
Option/accessory, for more information, see Introduction.
Active Dual Xenon lights*
If the car is equipped with
active headlamps (Active
Bending Lights, ABL) the light
from the headlamps follows the
steering wheel movement dur-
ing driving. The function is acti-
vated automatically when the car is started and
can be deactivated/activated by pressing the
button. The lamp in the button illuminates when
the function is activated.
Shifting headlamp pattern for right/left-
hand traffic
Hold the button depressed for at least 5 sec-
onds. The car must be stationary when the
headlamp pattern is shifted. The message
HEADLIGHTS SET FOR RH TRAFFIC
HEADLIGHTS SET FOR LH TRAFFIC
shown in the display. For more information and
adapting headlamp pattern for halogen or Dual
Xenon headlamps, see page 163.
Electric socket/Cigarette lighter*
The electrical socket can be
used for 12 V accessories, such
as mobile phone chargers and
coolers.
The remote control key must be at least in
position I so that the socket can supply power.
The cigarette lighter is activated by pushing in
the button. The button pops out when the
lighter is hot. Pull out the lighter and light a cig-
arette on the heated coils. For safety reasons,
always keep the cover in place when the
socket is not in use. Maximum current tap 10 A.
WARNING
Always leave the plug in the socket when
the socket is not in use.
BLIS - Blind Spot Information System*
Press the button to deactivate
or reactivate the function. See
page 147 for further informa-
tion.
or
is