Rear fog lamp
1. Insert a slotted screwdriver as indicated by
the arrow in the illustration.
2. Prise out the lamp insert.
3. Turn the bulb holder anticlockwise to
loosen it.
4. Turn the bulb anticlockwise and lift the
bulb out.
5. Replace the bulb.
Number plate lighting
1. Switch off all lights and turn the remote
control key to position 0.
2. Remove the screws with a screwdriver.
3. Loosen the whole lamp housing carefully
and pull it out.
4. Replace the bulb.
5. Refit the entire lamp housing and screw it
into place.
09 Maintenance and service
Replacing bulbs
Courtesy lighting
There is courtesy lighting under the instrument
panel on the driver and passenger sides.
1. Insert a screwdriver and gently turn so that
the lens detaches.
2. Remove the blown bulb.
3. Fit a new bulb.
4. Refit the lens.
09
213