Safety Compliance; Underwriters Laboratories Compliance Statement - Foundry Networks EdgeIron 2402CF Installation Manual

&
203/,$1&(6

Safety Compliance

Warning: Fiber Optic Port Safety
CLASS I
LASER DEVICE
Avertissment: Ports pour fibres optiques - sécurité sur le plan
optique
DISPOSITIF LASER
DE CLASSE I
Warnhinweis: Faseroptikanschlüsse - Optische Sicherheit
LASERGER
DER KLASSE I

Underwriters Laboratories Compliance Statement

Important! Before making connections, make sure you have the correct cord set.
Check it (read the label on the cable) against the following:
Pƒr…h‡vtÃW‚y‡htr
120 Volts
240 Volts (Europe
only)
When using a fiber optic port, never look at the
transmit laser while it is powered on. Also, never
look directly at the fiber TX port and fiber cable
ends when they are powered on.
Ne regardez jamais le laser tant qu'il est sous
tension. Ne regardez jamais directement le port TX
(Transmission) à fibres optiques et les embouts de
câbles à fibres optiques tant qu'ils sont sous tension.
Niemals ein Übertragungslaser betrachten,
ÄT
während dieses eingeschaltet ist. Niemals direkt auf
den Faser-TX-Anschluß und auf die
Faserkabelenden schauen, während diese
eingeschaltet sind.
8‚…qÃTr‡ÃTƒrpvsvph‡v‚†
UL Listed/CSA Certified Cord Set
Minimum 18 AWG
Type SVT or SJT three conductor cord
Maximum length of 15 feet
Parallel blade, grounding type attachment
plug rated 15 A, 125 V
Cord Set with H05VV-F cord having three
conductors with minimum diameter of 0.75
mm
IEC-320 receptacle
Male plug rated 10 A, 250 V
2