Power Supply Receptacle - Foundry Networks EdgeIron 2402CF Installation Manual

LED
Diag
Link
Duplex
Stack

Power Supply Receptacle

The power receptacle is located on the rear panel of the switch.
The standard power receptacle is for the AC power cord.
February 2003
System Status LEDs
Condition
On Green
Flashing
Green
On Amber
N/A
N/A
Flashing
Amber
Green
Amber
Flashing
Green
© 2003 Foundry Networks, Inc.
D
E SC R IPT IO N O F
The system diagnostic test has
completed successfully.
The system diagnostic test is in
progress.
The system diagnostic test has detected
a fault.
This indicator is not currently
implemented.
This indicator is not currently
implemented.
An initial state of stacking configuration
upon powering on.
This switch is acting as the master unit
in the stack.
This switch is acting as a slave unit in
the stack.
When the user enters the light unit
command in the CLI, the unit ID of each
switch in the stack will be displayed by
port LEDs 1 to 8.
H
A R D W A R E
Status
2-7