Table of Contents
Advertisement
Foundry NetIron M2404C and M2404F Metro Access Switches
Table 15
lists the default monitoring period values.
Command Syntax
device-name(config monitor INDICATOR)#show
Example
The following example shows the configuration settings for temperature monitoring:
device-name(config monitor temperature C)#show
Period
Fault LED
Traps
Log
Temperature limit
Displaying the Temperature
The show temperature command, in Privileged (Enable) mode, displays the current Celsius
(Centigrade) and Fahrenheit temperature at the unit CPU area.
If the temperature reaches its higher limit (55°C or 131°F default), the device can send an SNMP
trap to the trap destination.
Command Syntax
device-name#show temperature [
Argument Description
high-limit
Example 1
device-name#show temperature
CPU Temperature = 32C (90F)
Temperature is stable
Example 2
device-name#show temperature high-limit
CPU temperature high limit = 55C (131F)
Displaying the Power Supply Status
The show power supply command, in Privileged (Enable) mode, displays the power supply status.
If one of the power supplies changes its status, the device can send an SNMP trap to the trap
destination.
The trap is recorded in the trap log as follows:
5/22/101 15:53:24 10.4.1.23
reportshardwarepsstatus=02 02 01 00
Periodic Monitoring
: 20 sec.
: Enabled
: Enabled
: Enabled
: 55C
high-limit
(Optional). Displays the highest allowed Celsius (Centigrade) and Fahrenheit
temperature at the unit CPU area.
© 2008 Foundry Networks, Inc.
Troubleshooting and Monitoring (Rev. 03)
]
trap: p3
4, ent=t5router, comm=public,
10.4.1.23
Page 40 of 55
Advertisement
Chapters
Table of Contents
