Camera Configuration - Visonic PowerLink2 User Manual

Camera Configuration

You can enroll new cameras to the PowerLink2, remove enrolled cameras and change
the configuration of the cameras enrolled in the system. You can change the location,
the orientation (flip & mirror) and on which arming modes the camera would not be
accessible from the web interface.
To edit the video camera configuration of the system:
1. In the side menu of the Visonic PowerLink2 window click
2. Click the Cameras tab.
For each camera you can edit the following:
Click the arrow
•
appears click a new Location for the camera:
Click the
•
upside down. The color of the icon will change to green when the camera feed is
flipped and mirrored.
next to the LOCATION field and in the window that
icon to invert the camera feed to allow installing the camera
38
Managing Video Cameras
Add
Camera
Edit
Cameras
.