Step 2: Logging In To The Router; Step 3: Port Forwarding Configuration - Visonic PowerLink2 User Manual

Advanced internet-based home control solution
Table of Contents

Advertisement

5.
Copy the Default Gateway IP Address as the Home Router IP Address Value
in the Visonic PowerLink2 Installation Form (See Appendix B).
6.
Copy the first three blocks of the IP Address to the Visonic PowerLink2 IP
Address Value in the Visonic PowerLink2 Installation Form (the last block of
the IP Address is 200 if DHCP is used, see Appendix B).
Example: The Default Gateway value is 192.168.0.1:
The Home Router IP Address is 192.168.0.1.
The IP Address value is 192.168.0.3:
The Visonic PowerLink2 IP Address is 192.168.0.200.

Step 2: Logging In to the Router

You are required to login to your Router configuration interface.
1.
Open
your
HTTP://<Home Router IP Address>. Replace <Home Router
IP Address> with the value of "Home Router IP Address" from the
Installation form (see Appendix B).
2.
Once the Login page appears, type a username and a password to login.
Different Routers have different login interfaces. Refer to your Router's manual for
instructions.
If you are unable to login, call your home router installer or Internet service provider
for assistance.

Step 3: Port Forwarding Configuration

Router
port
forwarding
http://www.portforward.com.
1.
In your Router's window, locate the Port Forwarding configuration screen.
Set the Port Forwarding IP Address to the value of Visonic PowerLink2 IP
2.
Address from the Installation Form (see Appendix B).
3.
Set Protocol to TCP.
Set all port related fields to 443
4.
Internet
Browser
guides
for
14
Installing the Visonic PowerLink2
and
in
the
Address
your
router
can
IP Address
Default Gateway
line
type
be
found
at

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents