Vinotemp Wine-Mate WM-2500SSD Installation, Operation & Care Manual page 14

fan running b. Failed components
but
c. Low refrigerant
condensing
unit not
running
a. Evaporator air flow restriction
13.Evaporator
b. Condenser air flow restriction
freezing up
c. Not stopping due to air leak, high
d. Defective controller or probe
e. Low ambient temperature
f. Initially working then stopping,
g. Refrigerant low or leaking
h. Expansion valve blockage
a. Air
14.Water leak
b. High humidity
c. Evaporator air flow restriction or
d. Water passages restricted
e. Drip tray leak (No water overflow
a. Incorrect fuse or breaker
15.Circuit
b. Incorrect wirings
tripping
c. Failed components
a. Mounting area not firm
16.Noisy
b. Loose parts
operation
c. Compressor overloaded due to
d. Defective components
ambient temperature
temperature setting
moisture in the system
leak in the wine
(excessive condensate on the
front of the cooling unit)
low refrigerant
but water leak)
high ambient temperatures or
airflow restriction
- 13 -
b. Check start relay, start capacitor,
overload protector, compressor.
c. Call service
a. Check for fans and CFM
b. Check for fans and CFM
c. Check for
or low ambient
temperature setting
d. Check for controller and probe
e. Change defrost cycle
f. Call service
g. Call service
h. Call service
cellar a. Check for any air leak
b. Use drain line
c. Check supply air flow or air TD
crossing evaporator
d. Clean the drip tray
e. Seal the leak using silicone sealant
a. Check for proper fuse or breaker
b. Check for wirings and connections
c. Call service
a. Add support to improve installation
b. Check fan
washers, tubing contact and loose
screws.
c. Check for airflow
d. Call service for checking internal
loose, inadequate lubrication and
incorrect wirings
seal, door opening,
temperature and
blades, bearings,