Figure 5-2 Expanded Network Menu - NEC Express5800/A1160 Troubleshooting Manual

Configuration Procedures
5. Navigate to the desired command, such as one of the following, press OK, and
follow the instructions related to the command.
Set IP Addr, to change the IP address
Note: First be sure that DHCP is off.
Revert Changes, to exit the menu without making changes
Note: If the menu times out, changes are reverted by default.
For example, to set the IP address
a. If the value of Set DHCP on the network menu is On, navigate to Set DHCP
and press OK.
The value changes to Off.
b. Navigate to Set IP Addr and press OK.
The Set IP Addr screen appears.
c. Follow the instructions in
appropriately.
6. Navigate to Commit Changes on the network menu, and press OK.
The EXPRESSSCOPE® Monitor LCD displays a message to confirm the
commitment.
7. Press OK.
The changes are committed and the setting reservation is released.
5-8

Figure 5-2 Expanded Network Menu

Updating Network Values to set the value