Reconfiguring Service Processor On A Boot Cell; Reconfiguring Service Processor On A Boot Cell In A Multiple Cell Partition - NEC Express5800/A1160 Troubleshooting Manual

Service processor
Hide thumbs Also See for Express5800/A1160:
Table of Contents

Advertisement

See
5.3.1 Configuring Network
2.
Use remote console interface for your system to resolve any inconsistencies you
notice on the partitioning page.
See
5.3.2 Resolving Partitioning
3.
Use remote console interface for your partition or cell to load Secure Socket Layer
(SSL) certificates onto your Service Processor so as to eliminate browser startup
warnings.
See
5.3.7 Eliminating Browser Startup Warnings using Remote console
5.2.2.

Reconfiguring Service Processor on a Boot Cell

If your restored Service Processor is in a boot cell, perform the following:
1.
Use the EXPRESSSCOPE® Monitor interface to configure your cell and partition
network settings.
See
5.3.1 Configuring Network
2.
Use remote console interface for your system to create your partition.
See
5.3.3 Creating
3.
Use remote console interface for your partition to specify partition settings, including
customer data details for Call Home packets.
See
5.3.5 Specifying Partition
4.
Use remote console interface for your partition to add user credentials.
See
5.3.6 Adding User Credentials using Remote console
5.
Use remote console interface for your partition or cell to load Secure Socket Layer
(SSL) certificates onto your Service Processor so as to eliminate browser startup
warnings.
See
5.3.7 Eliminating Browser Startup Warnings using Remote console
6.
Use remote console interface for your partition to configure alert notifications.
See
5.3.8 Configuring Alerts and the SMTP Server using Remote console
5.2.3.
Reconfiguring Service Processor on a Boot Cell in a Multiple
Cell Partition
If your restored Service Processor is in a boot cell of a multiple cell partition where the
other Service Processor was not restored, perform the following:
1.
Use the EXPRESSSCOPE® Monitor interface to configure your cell and partition
network settings.
Configuring After Restoring Default Settings
Settings.
Inconsistencies.
Settings.
Partitions.
Settings.
interface.
interface.
interface.
interface.
5-5

Advertisement

Table of Contents
loading

Table of Contents