Figure 5-11 Alert Management - Modify Snmp Trap - NEC Express5800/A1160 Troubleshooting Manual

Figure 5-11 Alert Management - Modify SNMP Trap

Alternatively, click Cancel to return to the Alert Management page without
modifying the alert definition and skip the rest of this procedure.
4. Select SNMP Trap or Email from the Alert Type list.
5. Select the minimum severity level from the Event Severity list.
All events having the selected severity level or greater result in the alert being sent.
6. For e-mail alerts, type values for the following:
Email Address (the destination e-mail address)
Subject
Message (the text of the e-mail message)
7. For SNMP trap alerts, type a value for Destination IP Address.
The value is the IP address of the computer on which the background process that
watches for SNMP traps runs.
8. Click Submit.
A confirmation dialog box appears.
9. Click OK.
The Alert Management page appears displaying the new information.
Configuration Procedures
5-19