Obtaining Releases From The Support Site; Updating Management Firmware Using Remote Console Interface; Figure 2-3 Management Firmware Updates Page - NEC Express5800/A1160 Troubleshooting Manual

2.2. Obtaining Releases from the Support Site

If you need to install later release levels, such as management firmware or BIOS, you
can obtain the desired versions from the Product Support Web Site:
http://support.necam.com/servers/Enterprise/
2.3. Updating Management Firmware using Remote
console interface
You can determine the management firmware levels on the Service Processors and
update the firmware if necessary, provided you can access the partition remote console
interface, as follows:
1. Navigate to the firmware update page of the partition remote console interface, as
shown in
2. To update the management firmware on the partition, click Browse on the firmware
update page, navigate to the location of the saved firmware update file, and click
Load.
The firmware revision is loaded and distributed to the Service Processor of each
Figure 2-3.

Figure 2-3 Management Firmware Updates Page

Obtaining Releases from the Support Site
2-3