Installing Voice Assistant; Installing Voice Script Editor - Toshiba STRATA CIX System Administrator Manual

Installing Voice Assistant

1. Insert the Net Suite CD into the CD-ROM drive of your computer.
2. Locate Voice Assistant from the menu under Applications.
3. The installation wizard will guide you through installation. The default options should be used
throughout the installation process.
On the Choose Voice Board Type screen (shown below), check the Configure for T1 Support
option if you have installed a digital voice card, or a combination of digital and analog voice cards.

Installing Voice Script Editor

Voice Script Editor is installed automatically if Voice Assistant 3.3.x is installed. Install Voice Script
Editor separately when installing an older version of Voice Assistant.
Voice Script Editor installs in much the same way as Voice Assistant. If you are installing it on the
same PC as Voice Assistant, then it should be installed into the same directory.
If the PC dedicated to Voice Assistant is on a network which allows one PC to access the hard
drive of another PC, it is possible to install Voice Script Editor on a different PC altogether. The
installation procedure would be just the same as that described for the Voice Assistant PC, only it
would be performed at the other location. The first time that Voice Script Editor is run, it will have to
be informed of the Drive and Directory location of the script files, which will be in the Drive and a
Sub-Directory called SCRIPTS of the Directory where Voice Assistant was installed (PROGRAM
FILES\CTS\V_ASSIST32 by default).
If you install Voice Script Editor on a different PC on the network, you may also want to install it on
the dedicated, Voice Assistant PC as well since there are certain functions in Voice Assistant
which use Voice Script Editor. There is no harm in installing this application in as many different
locations as necessary.
Voice Assistant Adminstrator Guide 10/08
Voice Assistant Overview
Installing Voice Assistant
3