Operation Messages - Tascam SS-CDR200 Owner's Manual

15 − Message list
1st line
20
- caution - SURE TEXT
21
- caution - SAME NAME
22
Uaapproved FAT format

Operation messages

As necessary, the following messages will appear in the time display area.
1st line
1
POWER ON
2
DEVICE ERROR
3
NO MEDIA
4
MONITOR
5
MEDIA READING
6
MEDIA ERROR
7
UNKNOWN
8
INITIALIZING MEDIA
9
RECORD STAND BY
10
INFORMATION WRITING
11
FLASH LOADING
12
Fs CHANGING
78
TASCAM SS-CDR200/SS-R200/SS-R100
2nd line
CD Text has been added, but you are trying to eject the disc without writing the TOC.
(SS-CDR200 only)
An item with the same name already exists. (SS-CDR200 only)
The media has been formatted by something other than this unit, and this can cause
the following problems.
When recording, writing data might not occur in time, resulting in errors.
i
i
MEDIA READING
We recommend using media that has been formatted by this unit.
The system is starting up and initializing.
The device cannot be detected. Please contact TASCAM customer support.
Media is not loaded in the current device.
Now monitoring inputs.
Now reading from media.
Failed to read media.
The media is in a format other than FAT. Format the media with the unit in order to use
them together.
Creating data in order to use this media with the unit.
Now in recording standby.
Now writing recording information.
Now loading flash-start data.
The system's sampling frequency is being changed to match that of the current track.
Meaning
will take more time.
Meaning