Creating Data Cds - Tascam SS-CDR200 Owner's Manual

10 - Copying files between CDs and other media (SS-CDR200)

Creating data CDs

This section explains how files (MP3 or WAV files) from a
USB/SD/CF media can be copied in their current format to
create a data CD.
The following procedures assume that
current device and that USB/SD/CF media that includes
copy-source files and the destination CD-R/CD-RW disc
are loaded.
NOTE
You can copy WAV files on USB/SD/CF media to a CD-R/
CD-RW disc but you cannot record WAV files using a CD
using this unit.
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
2 Open the menu.
CD
3 Select , and press the MULTI JOG dial (or
BURN TO CD
remote control ENTER button).
4 Press the MULTI JOG dial (or remote control ENTER
button) to open a pop-up window where you can
select the device used.
5 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to select the device that
contains the files to be copied.
6 Press the MULTI JOG dial (or remote control ENTER
button) to open a pop-up window where you can
select the format for writing the CD-R/CD-RW disc.
NOTE
If the selected device media is still being read,
•
and a progress bar appear in a pop-up.
READ
If the selected device media is not loaded, after
•
, and the media type (
READ ERROR
appears in a pop-up.
7 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to select
is set as the
CD
screen.
MENU
MEDIA
MEDIA
, etc.)
CF READ
.
CD-Data
NOTE
If audio format files have already been written to the
CD-R/CD-RW disc, the above pop-up window will not
appear. format will be selected automatically.
CD-Data
8 Press the MULTI JOG dial (or remote control ENTER
button) to open the
FINDER
media.
9 Select the folder or file from the
copy to the CD-R/CD-RW disc. If you select a folder,
all the files in the folder will be copied.
To select multiple files or folders, when the desired
file or folder is selected, press the FUNCTION
button (or remote control FUNC button). Repeat
this for every file and folder.
Checkmarks ( ) are placed next to selected files
4
and folders. You can only select multiple files and
folders if they are in the same folder.
To deselect a selected file or folder, press the
FUNCTION button (or remote control FUNC button)
once again.
NOTE
You can select multiple files and folders only within the
•
same folder, so once you use the FUNCTION button (or
remote control FUNC button) to select the first file or
folder, you will no longer be able to move to a different
folder.
If you are selecting only one file or folder, there is no
•
need to press the FUNCTION button (or remote control
FUNC button). After selecting the desired file, proceed
to step 10.
10 When you have selected all of the files to be written
to the CD-R/CD-RW disc, press the MULTI JOG dial
(or remote control ENTER button) to confirm the
selections and open the
screen.
NOTE
If the selected copy-source files would exceed the free
•
space on the disc or the allowable number of tracks,
you will not be able to proceed to the
screen. In this case, delete some of the selected
SELECT
folders or files so that the limit is no longer exceeded.
TASCAM SS-CDR200/SS-R200/SS-R100
screen for the selected
screen to
FINDER
BURN TARGET SELECT
BURN TARGET
65