Tascam SS-CDR200 Owner's Manual page 68

10 - Copying files between CDs and other media (SS-CDR200)
4 Press the MULTI JOG dial (or remote control ENTER
button) to open a pop-up window where you can
select the device.
5 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to select the copy
destination device.
NOTE
If the selected device media is still being read,
•
and a progress bar appear in a pop-up.
READ
If the selected device media is not loaded, after
•
, and the media type (
READ ERROR
appears in a pop-up.
6 Press the MULTI JOG dial (or remote control ENTER
button) to open the RIP
7 Select the file or folder to copy from the
screen. If you select a folder, all
SOURCE SELECT
the files in the folder will be copied.
To select multiple files or folders, when the desired
file or folder is selected, press the FUNCTION
button (or remote control FUNC button). Repeat
this for every file and folder.
Checkmarks ( ) are placed next to selected files
4
and folders. You can only select multiple files and
folders if they are in the same folder.
To deselect a selected file or folder, press the
FUNCTION button (or remote control FUNC button)
once again.
NOTE
You can select multiple files and folders only within the
•
same folder, so once you use the FUNCTION button (or
remote control FUNC button) to select the first file or
folder, you will no longer be able to move to a different
folder.
If you are selecting only one file or folder, there is no
•
need to press the FUNCTION button (or remote control
FUNC button). After selecting the desired file, proceed
to step 5.
8 When you have selected all of the files you want to
copy, press the MULTI JOG dial (or remote control
ENTER button) to confirm the selections and open
68
TASCAM SS-CDR200/SS-R200/SS-R100
MEDIA
MEDIA
, etc.)
CF READ
screen.
SOURCE SELECT
RIP
the
RIP TARGET SELECT
select the copy destination.
NOTE
If the size of the source exceeds the remaining capacity
of the selected media, or the number of source tracks
would cause the number of files on the selected media
to exceed the limit file, a
CAPACITY OVER
message pop-up will appear accordingly, and you
OVER
will not be able to confirm the source selection. If this
occurs, press the STOP button to close the pop-up, and
deselect some source files until the total size or number
is acceptable. Then, press the MULTI JOG dial (or remote
control ENTER button) again.
9 Select the copy destination from the
screen.
SELECT
The folders or files will be copied after the selected
folder or file.
10 Press the MULTI JOG dial (or remote control ENTER
button) to confirm the copy destination.
A confirmation pop-up message appears.
NOTE
If there are files with the same name, the following
pop-up message will appear.
After this, the pop-up message disappears and the
menu screen opens.
11 Press the MULTI JOG dial (or remote control ENTER
button) again to start writing to the selected device
media.
and a progress bar appear in a pop-up
-- RIP --
while the files are copied.
When writing is completed, the
reopen.
screen where you can
or a
TRACK
RIP TARGET
CD
menu screen will
CD