Single Wire Connections - Tannoy KINGDOM ROYAL Manual

SINGLE WIRE CONNECTIONS

Connect the loudspeakers to the
amplifier using a high quality cable.
Your dealer will be able to make
recommendations. The terminals will
accept either spade or banana plugs.
Fit the link wires from the accessories
box, (see fig. 2).
Arrange the connections so that the
right hand amplifier channel terminals
are connected to the right hand
loudspeaker as viewed from the
listening position.
36 36
Correct polarity of the connections
between the amplifier and speakers is
essential. The positive terminal on the
amplifier left channel, marked + (plus)
or coloured red, must be connected to
the positive terminal on the left
loudspeaker. The negative terminal
on the amplifier left channel, marked
- (minus) or coloured black, must be
connected to the negative terminal on
the left loudspeaker.
Repeat this connection for the right
speaker. Good quality cables and tight,
well-made connections are necessary to
eliminate resistive losses and maintain
the correct damping of the loudspeaker
by the amplifier.