Specification - Tannoy KINGDOM ROYAL Manual

TECHNICAL SPECIFICATIONS
Cabinet Dimensions (H x W x D)
Enclosure Volume
Enclosure Type
Enclosure Weight
Recommended Amplifier Power
Power Rating
Maximum SPL
Total Harmonic Distortion
Sensitivity
Nominal Impedance
Dispersion
Frequency Response
Crossover Frequencies
Crossover Adjustments
Crossover Type
Low Frewquency Driver
Dual Concentric Driver
Supertweeter
TM
Cabinet Construction
1275 x 585 x 600 mm (50.2 x 23.0 x 23.6")
160 litre (5.65 cu.ft.)
Reflex for bass driver, closed box for Dual Concentric
120kg (265lbs)
20 to 600 watt RMS per channel
300 watt RMS
1200 watt peak
120dB at 1 metre for 300 watt RMS
126dB at 1 metre for 1200 watt peak
Less than 1% at 300 watt RMS (50Hz to 20kHz)
96dB for 2.83 volt at 1 metre
8 Ohms
90 degree conical
24Hz - 61kHz (-6dB)
120Hz bass to Dual Concentric
700Hz Dual Concentric midrange to compression tweeter
TM
17 kHz Dual Concentric tweeter to SuperTweeter
TM
Dual Concentric energy +/- 3.0dB in 5 steps, 700Hz- 17kHz
TM
SuperTweeter energy +/- 3.0dB in 5 steps, 17kHz- 61kHz
TM
Bi-Wired, Hard-Wired passive, low loss. All connections silver soldered. 99.9999%
purity PCOCC wiring, except for SuperTweeter
TM
custom silver cable. Complete assembly deep cryogenically treated. Free floating
isolation system. All crossover slopes 2nd order, except for SuperTweeter
1st order high pass
380mm (15 inch) nominal diameter with treated paper cone.
75mm (3 inch) diameter voice coil
300mm (12 inch) nominal diameter Dual Concentric
midrange voice coil and treated paper cone. High frequency 75mm (3 inch)
diameter aluminium alloy dome, deep cryogenically treated
25mm (1 inch) diameter 64 micron magnesium alloy dome, ceramic coated.
Neodymium magnet system. Plasma bonded voice coil
Birch ply and high density fibreboard. Extensive internal bracing
60 60
TM
midrange
TM
TM
99.997% purity single strand
TM
, with 52mm (2 inch)
TM
TM