Technical Specifications - Tannoy Power Dual iQ 15 User Manual

11.

Technical Specifications

Frequency Response (1) +/- 3dB
-10dB Point
Nominal Dispersion
Driver Compliment
Configurations
Components
Frequency Band (3)
Sensitivity (1)
Power Handling (2)
Impedance
Maximum SPL (3)
DI Averaged (PCQ)
Q Averaged (PCQ)
Crossover
Enclosure
Finish
Protective Grille
Connectors
Fittings
Dimensions
Weight
NOTES:
(1) Average over stated bandwidth. Measured at 1m on axis.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m in an anechoic chamber
The iQ 10/15 is designed for use with the Tannoy TDX1 & TDX2 digital system controller, which provide a preset configuration of
Crossover frequencies, relative output levels, and system equalization for optimum performance. Should you intend using an alternative
Loudspeaker management system, these parameters can be accessed from the Tannoy website –
.
IQ 10/15 user manual
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the publish
which Tannoy reserves the right to alter without prior notice.
Please verify the latest specifications when dealing with critical applications.
Unique Funktion One Axhead Technology (UK patent number GB2270606) is incorporated into
Tannoy iQ Series SuperDual
@ 1kHz (ISO)
@ 2kHz (ISO)
@ 4kHz (ISO)
@ 8kHz (ISO)
@ 16kHz (ISO)
@ 1kHz (ISO)
@ 2kHz (ISO)
@ 4kHz (ISO)
@ 8kHz (ISO)
@ 16kHz (ISO)
TM
products by agreement with Funkton One Research
49Hz - 19kHz
43Hz
o o
60 (H x V)
x 40
MF/HF – 1 x 250mm (10") PowerDual™
LF - 1 x 380mm (15")
Bi-amp (standard) - LF & Passive MF/HF
Tri-amp (optional)
LF Midrange
43Hz – 180Hz 180Hz – 2.77kHz
101dB 107dB
400W (average) 175W (average)
800W (programme) 350W (programme)
1600W (Peak) 700W (peak)
8Ω 16Ω
127dB (average) 129dB (average)
133 (peak) 135dB (peak)
11.0, 500 Hz - 16 kHz
12.6
12.2
9.5
11.5
12.3
13.5, 500 Hz - 16 kHz
18.3
16.7
8.8
14
16.9
Active 180Hz, Passive 2.6kHz (standard model)
4th order high pass, 4th order low pass
18mm multi-ply birch plywood
Textured black paint (optional in white)
Foam covered, powder coated perforated steel
2 x Speakon NL4MP in/out (standard model)
4 x Speakon NL4MP (optional tri-amp model)
8 x M10 inserts & 2 pullback points
4 x Recessed Carrying handles
1116mm x 680mm x 540mm
(43 " x 26 ¾" x 21 ¼")
15/16
69kg (152.1 lbs)
www.tannoy.com
High Frequency
2.77kHz – 19kHz
110dB
50W (average)
100W (programme)
200W (peak)
16Ω
127dB (average)
133dB (peak)
- or can be found in this