Fostex PD-6 Operation Manual page 144

PD-6 DVD Location Recorder (Chapter 11: Specifications)
*0 dBu=0.775 Vrms, 0 dBV=1 Vrms.
Reference level : -18 dB/-20 dB (default: -18 dB, selectable in the "Ref. Level" menu of the Setup
mode)
ANALOG MIC/LINE IN (CH 1 through 6)
<LINE>
<MIC>
ANALOG LINE OUT (TR 1 through TR 6)
HEADPHONE OUTPUT (SOLO or STEREO/MONO: 1+2, MS, 3/5+4/6, 1/3/5+2/4/6, 3/5+2/4/6, 1/
3+2/4, ST, AUX IN, ST. BUS)
DIGITAL I/O (for channels 1 through 6)
TIME CODE INPUT
TIME CODE OUTPUT
VIDEO/WORD INPUT
142
Inputs/Outputs
• Connectors
• Input impedance
• Input level
• Maximum input level
• Input impedance
• Input level
• Maximum input level
• Connectors
• Output load impedance
• Reference output level
• Maximum output level
• Connector
• Applicable load impedance
• Maximum output level
• Connector
• Format
<Input>
<Output>
• Connector
• Format
• Reference input level
• Input impedance
• Minimum input level
• Connector
• Format
• Reference output
• Output impedance
• Output load impedance
• Connector
• Refernce input level
* The signal type (word or video) is automatically detected.
: XLR-3-31 type (balanced, pin 2: hot)
: More than 10k
: -30 ~ +4dBu (+/-5dB)
: +24 dBu (+41 dBu at the prefader stage)
: More than 10k
: -60 ~ -26dBu (+/-5dB)
: -40 dBu (-23dBu at the prefader stage)
: XLR-3-32 type (balanced, pin 2: hot)
: More than 10k
: +4 dBu
: +24 dBu
: 6mm dia stereo phone jack
: More than 32
: 200 mW (at 32 )
: D-sub 25-pin (auto software selection)
: IEC 60958 (S/P DIF) or IEC 60958 (AES/EBU),
auto selection
: IEC 60958 (S/P DIF) or IEC 60958 (AES/EBU),
The format of an output signal is selected in
the Setup mode.
: XLR-3-31 type (balanced, pin 2: hot)
: SMPTE/EBU
: 2V p-p
: More than 20k
: 0.25V p-p
: XLR-3-32 type (balanced, pin 2: hot)
: SMPTE/EBU
: 2V p-p
: Less than 1k
: More than 600
: BNC type (auto software selection)
: TTL level (with 75 termination switch)